Model TI-110S |
 |
VEHICLE DESCRIPTION
The Track Industries Model TI 110 S is a low ground bearing pressure, off road, two-tracked carrier. It's unique features give outstanding performance in the geophysical, pipeline, utility and construction industries. This model operates with excellence in a variety of terrain conditions.
more photos
|
|
|
|
POWERTRAIN
Engine
Cummins EPA Approved Tier 2 QSB 5.9 205 BHP torque 625 lbs / ft @1500 RPM
Transmission
Allison New World series MD3560 4 speed automatic. MT-643 Allison Automatic available in rebuilt only.
Final Drive - M-24 Steering differential c/w oil cooler (4.56:1 ratio low speed)
Planetaries
Rockwell PR200. Planetaries (3.6:1)
Propeller Shafts
Spicer 1710 series
Brakes
Service: Air controlled internal M-24 cross-drive steering bandse
|
RUNNING GEAR
Tracks
Muskeg (D-dent) type track 40 in (1,016 mm). Heavy Duty 15" (381 mm) wide PN 240 polyester-nylon cord belt with rubber covering. 1/2 inch Spring steel, drop center grouser bar c/w backing plate. Elevated Drive Sprocket
Steel drive sprocket with replaceable polyurethane Muskeg (D-dent) inserts.
Elevated Idler Sprocket
Steel drive sprocket with replaceable polyurethane Muskeg (D-dent) inserts.
Suspension
Independent crank arm with torsional coil spring. Wheel hubs equipped with metal face seals.
Load Wheels
Rims: Steel disc 6.50 x 20, 10 stud 11 1/4" (285.8 mm)
Tires: Goodyear 7.50 x 20 - 16 ply
|
|
Cab
Track Industries Ltd. 2 man cab. Located over engine with full access to engine through removable panels. Constructed of heavy gauge steel, and fully insulated. Equipped with roll down door windows and escape hatch. Instruments
Full instrumentation: temperature gauge, voltmeter, oil pressure gauge, hourmeter, fuel gauge and tachometer.
Engine Monitor System
Shutdown system monitors, high temperature, low oil pressure and low coolant.
|
Electrical
Alternator – 100 amp. 12 volt Battery – 8D 1450 CCA.Dome light and two speed windshield wiper motors.
Cab Heating
Cab is equipped with one 48,000 BTU heater located in the front and a 40,000 BTU bus heater in the rear.
Frame
High strength steel, all welded construction with flanged rails. Fuel Capacity
Hydraulic Capacity 99 US gallons (375 liters) 33 US gallons (125 liters)
|
|
Schematic Drawing & Dimensional Front & Side View |
|
| DIMENSIONS |
Imperial |
Metric |
|
|
|
Length - Overall |
23 ft. 6.5 in. |
7.18 m |
Height - Overall |
9 ft. 7.5 in. |
2.93 m |
Width - Overall |
|
|
| |
10 ft. |
3.05 m |
| |
8 ft. |
2.44 m |
|
|
|
WEIGHTS |
Lbs. |
Kg. |
Tare |
25,000 |
11,400 |
Payload |
20,000 |
9,072 |
Gross Vehicle Weight |
45,000 |
20,472 |
Note: Weight is excluding options |
|
|
|
|
|
PERFORMANCE |
|
|
Turning Radius |
198 in. |
503 cm |
Fording Depth |
48 in. |
122 cm |
Ground Clearance |
15 in. |
38 mm |
Maximum Speed |
12.2 mph |
19.6 km/h |
Gradeability |
Forward: 60% |
Side: 40% |
|
|
|
GROUND PRESSURE |
|
|
Track area at 6" penetration |
12,440 sq. in. |
8.03 sq. m. |
|
PSI |
Kg/sq. cm. |
No Load |
2.00 |
0.14 |
Loaded |
3.86 |
0.27 |
|
Note: ground pressure taken at 6" penetration. |
ADDITIONAL STANDARD EQUIPMENT
Bumper, pintle hook, wheel lug nut wrench, and a operator’s maintenance and parts manual. |
OPTIONS AVAILABLE
Long wheel base frame, engines, hydraulic packages, cabs (singleman, crew, certified R.O.P.S.) tundra tracks, decks, brush guards, foam-filled tires, winches, fuel tanks, spare wheel and mount, custom configurations, |
Unless otherwise stated, specifications are for standard unit and are subject to change without notice. For information on available options, please contact Track Industries Ltd.
download PDF vehicle brochure
|
 |
|
|
|
