Model HT-60WB |
 |
VEHICLE DESCRIPTION
The model Hydra Trac 60WB hydrostatic all-terrain carrier, is rugged and reliable. This unit has applications in the geophysical, pipeline, utility and construction industries. The HT 60WB performs with excellence and with quality engineering has long-term value.
more photos
|
|
|
|
STANDARD SPECIFICATIONS
AVAILABLE POWERTRAINS
Engines
Cummins EPA Approved 6B5.9-C174 BPH @ 2500 RPMTorque 455 lbs/ft @ 1500 RPM
Hydrostatic Drive
Pump Drive - 2 hole
Pumps (2) Sundstrand series 90
Motors (2) Sundstrand series 51
Torque Hubs (2) Fairfield (c/w built in spring brakes)
Oil Cooler
Oil Tank 30 Imperial Gallons
System operating pressure 4,000 PSI
Controls - electric over hydraulic, 2 levers
|
GENERAL SPECIFICATIONS
Electrical
Alternator – 95 amp. 12 voltBattery – D8 200 amp/hr.
Suspension
Walking beams – urethane bearings.
Load Wheels
Rims – 16 x 5.50 – 10 stud split rim
Tires – 6.00 x 16, 10 Ply smooth
Tracks
Rubber belts and drop center steel grousers.
Sprockets
Steel with replaceable urethane inserts.
Elevated Front Idlers
Solid rubber.
Cab
Two man steel, domelight, headlights, panel light, two speed windshield wipers, insulated and heated.
Fuel
45 Imperial gallons (264 liters)
Instruments
Full instrumentation: temperature gauge, ammeter, oil pressure gauge, hourmeter, fuel gauge, tachometer.
|
|
Schematic Drawing & Dimensional Front & Side View |
|
| DIMENSIONS |
Imperial |
Metric |
|
|
|
Length - Overall |
204.75 in |
520 cm |
Height - Overall |
95 in. |
242 cm |
Width - Overall |
|
|
| |
95.5 in. |
244 cm |
| |
84 in. |
213 cm |
|
|
|
WEIGHTS |
Lbs. |
Kg. |
Tare |
14,000 |
6,250 |
Payload |
8,000 |
3,630 |
Gross Vehicle Weight |
22,000 |
9,820 |
Note: Weight is excluding options |
|
|
|
|
|
PERFORMANCE |
|
|
Turning Radius |
0 in. |
0 cm |
Fording Depth |
42 in. |
106.8 cm |
Ground Clearance |
14 in. |
35.5 mm |
Maximum Speed |
10 mph |
16 km/h |
Gradeability |
Forward: 60% |
Side: 40% |
|
|
|
GROUND PRESSURE |
|
|
Track area at 6" penetration |
9,750 sq. in. |
5.65 sq. m. |
|
PSI |
Kg/sq. cm. |
No Load - 6 " penetration |
1.60 |
0.113 |
Loaded - 6 " penetration |
2.50 |
0.177 |
|
|
ADDITIONAL STANDARD EQUIPMENT
Bumper, pintle hook, wheel lug nut wrench, exhaust pipe rain caps, full underpan (3 removeable sections), operator’s maintenance and parts manuals. |
OPTIONS AVAILABLE
Sprung suspension, cabs (singleman, crew, certified R.O.P.S.), tundra tracks, decks, brush guards, foam-filled tires, winches, fuel tanks, spare wheel and mount, and custom configurations. |
Unless otherwise stated, specifications are for standard unit and are subject to change without notice. For information on available options, please contact Track Industries Ltd.
download PDF vehicle brochure
|
 |
|
|
|
