Model HT-60HD |
 |
VEHICLE DESCRIPTION
The model Hydra Trac 60HD hydrostatic all-terrain carrier, is rugged and reliable. This unit has applications in the geophysical, pipeline, utility and construction industries. The HT 60HD performs with excellence and with quality engineering has long-term value.
more photos
|
|
|
|
AVAILABLE POWERTRAINS
Engines
Cummins EPA Approved Tier 2 QSB5.9 205BHP
Torque 625 lbs/ft @ 1500 RPM
Hydrostatic Drive
Pump Drive - 2 hole
Pumps (2) Sundstrand series 90L
Motors (2) Sundstrand series 90V
Torque Hubs (2) Fairfield (c/w built in spring brakes)
Oil Cooler
Oil Tank 33 Imperial Gallons
System operating pressure 5,070 PSI
Controls - electric single joy stick
Options: Electric dual joystick, single hydraulic or dual hydraulic.
|
GENERAL SPECIFICATIONS
Electrical
Alternator – 100 amp. 12 volt
Battery – 8d 200 amp/hr.
Suspension
Walking beams – urethane bearings.
Load Wheels
Rims – 16 x 5.50 – 10 stud split rimTires – 6.00 x 16, 10 Ply smooth
Tracks
Rubber belts and drop center steel grousers.
Sprockets
Steel with replaceable urethane inserts.
Elevated Front Idlers
Cab
Two man steel, domelight, headlights, panel light, two speed windshield wipers, insulated and heated. R.O.P.S. certified.
Fuel
86 Imperial gallons (390 liters)
Instruments
Full instrumentation: charge pressure, fuel gauge, hydraulic temperature, murphy powerview module.
|
|
Schematic Drawing & Dimensional Front & Side View |
|
| DIMENSIONS |
Imperial |
Metric |
|
|
|
Length - Overall |
240 in. |
610 cm |
Height - Overall |
108 in. |
274 cm |
Width - Overall |
|
|
| |
96 in. |
244 cm |
| |
88 in. |
223 cm |
|
|
|
WEIGHTS |
Lbs. |
Kg. |
Tare |
20,000 |
9,072 |
Payload |
10,000 |
4,536 |
Gross Vehicle Weight |
30,000 |
13,608 |
Note: Weight is excluding options |
|
|
|
|
|
PERFORMANCE |
|
|
Turning Radius |
0 in. |
0 cm |
Fording Depth |
52 in. |
132.5 cm |
Ground Clearance |
22 in. |
56 mm |
Maximum Speed |
8.6 mph |
13.8 km/h |
Gradeability |
Forward: 60% |
Side: 40% |
|
|
|
GROUND PRESSURE |
|
|
Track area at 6" penetration |
9,432 sq. in. |
6.09 sq. m. |
| Track area at 0 " penetration |
6732 sq. in. |
4.34 sq. m. |
|
PSI |
Kg/sq. cm. |
No Load - 0 " penetration |
2.97 |
0.208 |
Loaded - 0 " penetration |
4.46 |
0.313 |
No Load - 6 " penetration |
2.12 |
0.149 |
Loaded - 6 " penetration |
3.18 |
0.223 |
|
|
ADDITIONAL STANDARD EQUIPMENT
Bumper, pintle hook, wheel lug nut wrench, exhaust pipe rain caps, full underpan (3 removeable sections), operator’s maintenance and parts manuals. |
OPTIONS AVAILABLE
Cabs (singleman, crew, certified R.O.P.S.), tundra tracks, decks, brush guards, foam-filled tires, winches, fuel tanks, spare wheel and mount, and custom configurations. |
Unless otherwise stated, specifications are for standard unit and are subject to change without notice. For information on available options, please contact Track Industries Ltd.
download PDF vehicle brochure
|
 |
|
|
|
